How to remove rust easily and effectively without sanding

Remove rust without sanding? It's possible! With Ranex Rustbuster, you thoroughly eliminate rust without time-consuming sanding. This powerful rust remover penetrates deep into the rust and converts it into an inactive phosphate, leaving the surface ready for further finishing.

Why remove rust without sanding?

✅ Time-saving – No intensive sanding required.

✅ No damage – Safe for metal, paint, and coatings.

✅ Deep action – Removes rust down to the pores.

✅ Easy to use – Apply, let it soak in, and dry. However, for stainless steel, chrome, galvanized steel, and aluminum, do not allow the liquid to dry, but rinse the surface with water as soon as the rust is

dissolved.

This is how you remove rust without sanding

Simple and effective rust removal without sanding.

Suitable for rust, flash rust, and pitting rust. Applicable to any metal: iron, steel, stainless steel, chrome, copper, aluminum, and galvanized steel. Rust is destroyed and removed down to the core, resulting in a 100% rust-free surface.

Ranex Rustbuster provides very good adhesion to coatings. If the surface is to be overpainted, any 1K and 2K primer or coating can be used.

Applications:

Ranex Rustbuster is a versatile product for removing rust. In addition to being used as a rust remover, Ranex Rustbuster can also be used to remove limescale, rust particles, and flash rust.

• Rust remover

• Remove rust particles

• Remove flash rust

• Remove rust spots

• Remove limescale

User manual

The Ranex Rustbuster instructions are easy for anyone to apply to remove rust from metal. To use Ranex Rustbuster correctly, follow the step-by-step plan below.

Remove rust

• Remove loose paint and rust.

• Clean the surface with a degreaser.

• Ensure the surface is dry.

• Ranex Rustbuster can be applied with a roller or brush.

• Let Ranex Rustbuster dry for 24 hours.

Finished!

Remove flash rust

With Ranex Rustbuster, you can also remove flash rust, particularly on stainless steel and chrome. You can also easily remove rust and rust spots from coatings with Ranex. To use Ranex as a flash rust remover, you must apply the product differently than you normally would. Follow the step-by-step plan below to remove flash rust.

• Apply Ranex Rustbuster with a brush or roller.

• Let it soak in for 15 to 30 minutes.

• Caution, do not let the product dry out!

• Rust removed? Rinse it with water or wipe it with a wet cloth.

Features of Ranex Rustbuster

• Powerful rust removal

• Remove rust deep into the core and pores

• Has no adverse effect on coating, paint, polyester, or rubber

• Provides metal with temporary protection for up to 6 weeks

• Ensures a good base layer - adhesion to primer, undercoat, or coating

• Ideal for removing rust in hard-to-reach places

• Consumption:

  • 1 liter = 8m2 for heavy rust

  • 1 liter = 30m2 for light rust, surface rust, and rust streaks

​

What is Ranex Rustbuster ?

Ranex Rustbuster is a special rust remover that converts rust into an inactive iron phosphate. The product penetrates deep into the core of the rust and ensures that the metal surface becomes 100% rust-free. Once the rust has completely dissolved, the surface is ready to be repainted or coated. If the surface is not to be painted, for example stainless steel or chrome, it is important to rinse the surface with water.